PRIME AND GRIP

  • Nation wide deliveryNation wide delivery
  • Quality SlateQuality Slate
  • Made to MeasureMade to Measure

PRIME AND GRIP

Preparation

Primers are designed to stabilise and seal the substrate prior to applying one of the Tilemaster cement based products.  Primers increase the adhesion of cement based products.

Flexible additives are used to enhance the performance of Tilemaster cement based products.  When added to tile adhesive and/or grout, the flexible additive improves the products adhesion, flexibility and durability. Tilemaster Prime + Grip is a ready mixed, ready to use, rapid drying primer that can be used on both absorbent and non-absorbent substrates. Tilemaster Prime + Grip provides a textured "+ Grip" surface which gives an excellent bonding surface for Tilemaster tile adhesives and self-levelling compounds. Tilemaster Prime + Grip gives added confidence when tiling and/or self-levelling directly onto smooth, non-absorbent and absorbent surfaces due to its excellent bond enhancing properties. Tilemaster Prime + Grip is rapid drying and it can be tiled or levelled over after as little as 15 minutes. Tilemaster Prime + Grip is suitable for use internally and externally. Tilemaster Prime + Grip is our recommended primer to be used in conjunction with Tilemaster FAST One Coat DPM.

Prime And Grip Multi Purpose Bond Enhancing Primer 1

Suitability

  • Wet Access
  • UFH
  • Walls
  • Bathrooms
  • Outdoor
  • Indoor
  • Floors
Area Calculator Advice Length (M) X Width (M) = Area Required (M2)